Macard RE 1200 Wifi Extender Setup: Tips and Tactics
The Macard Wi-Fi Range Extender is a modern networking device that provides excellent network range and speed. This high-performance mesh system effectively eliminates dead zones in your home. To maximize its potential, the Macard re 1200 wifi extender setup process.
If you are considering configuring your device, following this guide is important. You can set up your networking device in two ways. In this blog, you will learn the effective methods for completing the Macard re 1200 setup. Let’s dive into the details.
How to Setup Macard RE 1200?
Before proceeding with the setup process, make sure you have all the necessary items ready: an active Wi-Fi connection, admin login details, a Windows system, web/IP address, ethernet cable, etc.
As noted earlier, there are two methods to set up the networking device: via the Web GUI and through the WPS button. If you want to learn about both procedures, follow the steps outlined below.
Macard RE 1200 Wifi Extender Setup Though the Web Interface
- First and foremost, power on your smart Macard Extender.
- Now, connect the CPU to the repeater’s network.
- Then, open the web browser and type the go.macard.online/ web address in the browser bar.
- Next, enter the admin details on the login window that occurs on the screen.
- If you are a fresh user, then form an account first and select the extender mode to move ahead.
- After logging in, you reach the smart setup page of the device.
- Hereon, navigate the Wireless Settings and edit the SSID name and password (WPA2 PSK).
- Hereon, mention the distinctive name and password in the altered field and then click on Save settings.
- Furthermore, go back to the dashboard, and go ahead with the Advanced settings.
- Next, follow the upcoming guidelines on the screen to configure the Guest network, Access Point, Parental control, etc.
- Finally, the Macard re 1200 setup process is done.
How to Setup Macard RE 1200 Using the WPS Button
- To start with, switch on your Macard repeater and your router as well.
- Now, position both devices around each other.
- Then, find the WPS button on the router first, and then on the extender.
Next, press & hold the button on the router first and then on the extender simultaneously within 2 minutes. - Later, release the buttons from both networking devices when the green light starts blinking on the repeater.
- Further, the range extender is connected successfully to the router’s network.
- Lastly, the Macard re 1200 wifi extender setup process is conducted.
Wrapping Up
On the whole, the above-mentioned details about the Macard re 1200 wifi extender setup will help you comprehend the entire procedure. Furthermore, before you pick the solution, you must walk through the needs and then go with the methodology.