Macard MC1800 Setup

Macard Wi-Fi range extenders are top networking devices. Additionally, these are designed for the extended network and wider coverage. If you own such a gateway, then Macard MC1800 setup is an essential step.

Further, the configuration of this smart wireless gadget is primarily conducted through the WPS, Web address, and the app. So, to explore more about the Macard MC1800 WiFi Mesh system setup, just walk through this page.

Prerequisites for Macard MC1800 Mesh Setup

Further, with the Macard MC1800 dual-band extender setup, you will require some of the essentials. Therefore, here are the most important things required in the process of this setup mentioned below:

Macard WiFi
Extender

internet
connection

web/IP
address

administrator
details

Macard
extender app

Computer/
smartphone

Ethernet
cables, etc.

Power
supply

What are the Quick Steps for the Macard MC1800 Setup?

In addition, when you are preparing the basic items, it is the right time to move forward with the installation process. Secondly, you can choose the web browser, app, and WPS button method as well. So, let’s discuss the step-by-step procedure of each process in the below section, glance at once:

Web Portal

First of all, insert the extender into the power outlet near your wifi router and power it on.
Further, connect the computer/laptop to the extender’s network.
Later, open a web browser and type the go.macard.online web address in the address bar.
Alternatively, you can also use the 192.168.10.1 IP address instead of the web address.
Now, a Macard MC1800 WiFi 6 login screen appears to you, so mention the valid admin details here.
Next, you come to the setup dashboard of the extender.
From now on, you will choose your device as ‘Repeater’ and begin the configuration.
Then, go to the Wireless Settings and change the default SSID and password.
Now, enter a new SSID and password in the fields given under the WPA2-PSK security mode.
Now, tap on the ‘Save Settings’ option to apply these changes.
Likewise, go to Advanced Settings to configure further settings, such as firmware updates, network settings, channel selection, etc.
Finally, the Macard MC1800 setup process ends here.

Method WPS Button

In the first place, confirm that your networking device is turned on.
Put the networking device near the router.
Before you set your repeater to the network, you have to ensure that you reset it through the reset button for 15 seconds to restart the device.
Then locate the WPS button of the router first and then for the extender device.
Now, press this knob using a small paper clip or pin on your router first and then on your range extender.
Hold this button for about 10 seconds until the LED on both devices starts blinking.
Further, release the knob and wait until the extender reboots completely.
Lastly, the Macard WiFi MC1800 setup is complete.

Macard WiFi Manager App

First, check whether your mobile is connected to the Macrard network.
After that, confirm you have an updated version of the Macard wifi Manager app on your mobile device.
Next, open up the application and log in to the admin account through valid email/admin details.
Now select the 2.4 GHz wifi network that appears before you, and which you need to extend.
Afterward, mention the chosen network password to join it, and tap ‘Done.’
Further, select the MC1800 range extender, navigate to Settings>Wireless and Network settings, and modify them according to your preferences.
Follow the further in-app instructions to configure these settings and more.
At last, the Macard MC1800 WiFi mesh system setup finishes now.

Have Issues With the Macard MC1800 Setup? Find the Quick Fixes Here!

Generally, the Macard MC1800 gets stuck due to many causes during configuration. Some of the probable causes include issues with the wifi connectivity, power issues, wrong admin details, and so many others. So, to get rid of these, try the following quick fixes:

First and foremost, you require a stable internet connection during configuration. Hence, use ethernet cables to stabilize it.
Also, ensure that all the attached devices and the MC1800 wifi extender have an adequate power supply.
Check and replace the faulty, damaged, and burnt cables and use the original power adapter.
Verify the web address and admin details before accessing the Macard MC1800 WiFi extender login page.
Also, remove the network barriers such as mirrors, sheer curtains, heavy furniture, cemented walls, etc.
If you encounter connectivity issues with wifi for several times, then shift your device to a place that is more central for more signal strength.
Clean unnecessary browser and app data before proceeding for a smooth setup.
Ensure you operate the latest version of the Macard WiFi Manager application.
Turn all the required permissions of the app to facilitate an easier setup process.
If the web address mentioned above is not supported by the preferred web browser then use another web browser.
Also, power cycle your gadget to remove the technical flaws and bugs.
If face continuous network issues, then contact your ISP authority.
Make sure you are setting the MC1800 at a recommended 2.4GHz network frequency.
When nothing works, the Macard MC1800 Mesh Extender Factory Reset will be your last resort. It will restore your networking device to its default factory settings.

What are the Steps for Macard MC1800 Extender Reset?

Moreover, the hard reset macard wifi extender should be done when other troubleshooting methods do not work. Therefore, if you need help with the Macard MC1800 mesh reset via the web address, then go ahead with the below-mentioned instructions:

First & foremost, check that the repeater is turned on.
Now, connect the computer/laptop to the Macard extender’s network.
After that, open the web browser and key in go.macard.online web address in it.
Here, mention the valid admin details on the login window that prompts you.
Next, you land on the smart setup wizard of the range extender.
Hereon, look for the Factory reset/reset option and click on it.
Further, follow the on-screen instructions to complete the hard reset process.
Finally, you are done with the hard reset of the extender.

If you still in need of further assistance? Reach us!